Below is a step-by-step guide on how to use your Haaze device:
- Charge the pen battery by plugging the charger into the end of the battery, and connect the other end of the chord to a USB device or outlet.
- Once fully charged, thread the cartridge onto the battery.
- Click the button 5 times fast to turn on the device. A white light will flash to indicate when the device is on.
- Hold the button down to activate and inhale from the mouthpiece. A white light should illuminate around the button to indicate the device is active while pressing down (if you do not see this, try clicking 5 times again to ensure the device is not turned off).
- You can moderate your dosage by the length of your inhale.
- Be sure to always inhale when holding down the button, as this will continue to burn the oil and can result in lost product.
- Once you have finished use, press the button 5 times fast to turn off the device.
Extra Tips:
Haaze pens come with temperature settings on their batteries. These settings can be activated by clicking the button 3 times to cycle through them.
The variable voltage settings can be seen in the image below, along with their corresponding light colour:
WHITE 2.7 V
BLUE 3.1 V
RED 3.6 V
*Please note, all Pot Cargo vape pens must be used with the corresponding cartridges and batteries as provided by the vendor. If you experience malfunctions with a device due to mixing brands the pen warranty will be void.